Universal Moped Anti-Theft Device or Helmet Lock

Description

This universal lock can mount to handlebars, luggage racks or any other round tubes.   Use the cable to lock your helmet to the moped or lock your moped to a pole, bicke rack etc.
Comes with two keys and adapter shims for different diameter mounting.  The cable slides out for storage when not in use.  Or keep it locked up for quick access.
Cable is 10mm thick and heavy gauge to prevent cutting.  15" long.
Fits 13mm- 22mm diameter round bar/tubes
Made in Italy by La Conchiglia
Cascolock/U1
Part # 83.00921.0.2
Listing and template services provided by inkFrog
YOU HAVE NO IGNITION AND LOCKED STEERING IN YOUR AUDI?
D
O IT YOURSELF AND SAVE $$$
IT COSTS IN EXCESS OF 2000$ TO REPAIR COMMON STEERING LOCK MODULE FAULT AT DEALERS. FOR UNDER 100$ AND 3 HOURS OF YOUR TIME GET YOUR CAR UP AND RUNING.
When you need repair this module :
-
the key authorization module go nuts and it just lock you out and it not start anymore
-Key couldn't open ignition,couldn't release the gear or turn the steering wheel,the display is black and car locked out/can't start
-
Battery In good condition
all the lights on the ignition coming up but engine not cranking
-Takes several attempts before car will start
-Steering lock fault code 00288 (steering lock actuator N360)
Why cause this
PROBLEM?
The Access Start Authorization lock module is a part of vehicle's steering column.  Module failure is a common problem in Audi 2004-2009 A6/C6/S6 and Q7 model vehicles.  The problem is typically identified by no start and no response from key in the ignition, or proximity access (Start button). The Start / Stop Authorization Module (along with the Electronic Ignition Switch) is responsible for key/transponder recognition, unlocking/locking of steering wheel and powering up all modules in the vehicle. If there is an issue with any of the lock module components (actuator motor, sensing micro switches, relay) or the integrated Immobilizer system Microprocessor/PCB, the module will not provide power to Terminal 15 (ignition on).  End result, no ignition and no engine start.  The module will typically store "00288 - Steering Column Lock Actuator  Defective" fault.
THE SOLUTION
You don't need cost a couple of thousand dollars for this problem.
You just need replace four parts.
Three switch
(2 of them with spring plate)
and one ACT512 relay.Totally only need 20$.Diy repair with no need for coding or dealer visit.
Anyone with basic knowledge and tools can desolder old and solder new parts. Just be patient and tidy.
Also you can go to electric shop for some solder work.
Clike me see Youtube video:
what needs to be removed to get to this
module
Click me see Youtube video:how to fix
Steering Lock Module
Tips:
If the module from your car then
NO ADAPTATION is required. Just put it back in when you change the parts.
If you already managed to reset this error by EOBD diagnostics the problem will most likely happen again unless you change the
s
witches and relay.
There are some differences between this switch with spring plate and the original one,but the function is the same.You can buy it with confidence.
This kit will not solve the problem if the motor itself is damaged. You can check the motor easily with 12VDC supply. It happens rarely but it’s better to check.
What you get:
1 Set repair kit(
Three switch
(2 of them with spring plate)
and one ACT512 relay
)
1 Year warranty(60 Day Money Back Guarantee)
About the shipment
We will send the item in 3 day after your payment and ship from China.We will tell you how to track the item when we sent the item.
The item need 15-20 days arrive in European and USA .Other country need 15-25 days.
ts.templateBased